Close
Russia Moscow
8(964)777-40-29 order@rus-mil.com
Open hours: Mon - Sat 00.00 - 00.00

Shoulder straps molle hydraulic system by SSO (Sposn)

32.96$34.27$

Clear
SKU: N/A Category: Product ID: 9285

Description

Shoulder straps molle hydraulic system by SSO (Sposn)


The backrest is removable, designed to be worn with a series of our bibs SIGNUM, BREST, NUKER, LEGAT, PASSWORD, SARMAT, SARMAT – M instead of the standard shoulder straps with which they are equipped.
The back consists of two layers of synthetic rigid synthetic mesh and shoulder straps sewn to it, a belt and side adjustments in size and height.
Two layers of mesh form a flat inner pocket, 410 mm high and 270 mm wide, in which to carry a drinking water system with a capacity of three liters.
The top pocket is fastened with Velcro, 190 mm long and 25 mm wide. Shoulder straps made of 40 mm wide belt tape are sewn to soft cushions 400 mm long and 80 mm wide with an inner 10 mm thick polyethylene insert. On the left and right sides of the back, belt tapes 40 and 25 mm wide are sewn. Belts of 40 mm are sewn at an angle of 45º and, like shoulder straps, are inserted into the adjusting frames of the buckles – fastexes of the above listed bib models instead of their standard shoulder straps.

To prevent the loaded backrest from sliding down, the free ends of the belt are threaded under metal buckles – five-walled. The excess belt is folded up and stored under elastic couplings. Belts with a width of 25 mm are threaded into the adjustment of the side fastex of the bib. A horizontal belt strip 50 mm wide is sewn into the lower part of the back, which is threaded into the frames of the lower fastexes and serves as a belt that pulls the bib to the body. In order for the belt to fit the user up to size 42, it is not sewn over the entire width of the back, but 110 mm in the center. Three detachable loops for the waist belt are sewn under the belt.

Additional equipment can be fastened to the horizontal PALS (MOLLE) straps that cover the outer side of the back and shoulder straps.
An evacuation loop from a 40 mm wide belt tape is sewn onto the top of the backrest.
The weight of a product made of 500D fabric is 590 grams.


Shipping: shipping worldwide. (2-5 weeks)

Delivery: ships within 1-3 days after receiving cleared payment.

Payments: PayPal


paypal-verified

Additional information

Weight 0.7 kg
Dimensions 20 × 20 × 20 cm
Pattern

a-tacs fg, Black, Digital flora, Multicam, Olive, Spectre, Spectre SKWO

Brand

SSO/SPOSN

Reviews

There are no reviews yet.

Be the first to review “Shoulder straps molle hydraulic system by SSO (Sposn)”

Your email address will not be published. Required fields are marked *