Plate carrier "Pancer" by sso/sposn
You can also use the case as a convenient unloading vest for PALS (MOLLE) modules without any protection at all. The case consists of six parts: the chest and dorsal panels, two lateral girths, two soft removable overlays on the shoulder straps. The front and on the straps of the parts are interconnected by a textile clasp, and at the back with elastic cords – elastic bands with plastic stoppers.
Textile clasp and side straps attached to it with handles, covered with a rectangular flap. Inside the valve there is a pocket with a textile fastener – you can carry a card, documents in it or fasten a flat insert – a pocket for three AKM / AK – 74 stores with fixation of cords with flags. The valve and the upper part of the front panel are sheathed with strap belts for fastening the modules and special couplings with textile fastener for fixing the radio station cable.
Also, a textile clasp for attaching chevrons is sewn on top. Inside the panel there are two pockets – one intended for the ceramic panel "Granit", SAPI. The second pocket for the anti-splinter screen and the sheet of cushioning foam. The plate and the screen are inserted into the pockets below and fastened with a textile fastener. In order to quickly remove the plate you need to pull the belt belt of the internal valve, which fixes the plate. The side loops also have internal pockets for side plates and splinter screens.
In front of them are pockets for a radio station. On the dorsal panel, the side straps are fixed with an elastic cord, threaded into the PALS fastening straps, covered with a folding rectangular flap. The back panel is also divided into two pockets for the plate, anti-splitting screen, shock absorbing foam and lined with a textile clasp for attaching chevrons.
An evacuation loop of a 40 mm wide belt belt is sewn in the upper part. Belt tapes and a textile fastener are attached to the lining of the front and back panels to fasten the collar and aprons. The height of the cover is adjusted by the shoulder straps, which are fixed on the textile buckle. On these straps are put on soft lining with sleeves fixing the cable of the radio station. The plate carrier "Pancer" is made in two sizes for plates "Granit" of the second and third sizes.
The height of the front panel is 40 cm, width is 30 cm. The height of the rear panel is 42 cm, width is 31 cm. The height of the lateral girths is 15 cm, with flaps – 21 cm. The cover is made of fabric with a density of 1000 D 100% polyamide with a polyurethane coating. Lining and internal pockets of fabric with a density of 600 D 100% polyamide. The weight of a cover is 1 kg 110 grams.
Shipping: shipping worldwide. (2-5 weeks)
Delivery: ships within 1-3 days after receiving cleared payment.