RDG 2 molle pouch for two hand smoke grenades RDG-P by SSO (Sposn)
Pouch for two hand smoke grenades RDG-P.
The pouch is of a closed type, with a volumetric valve that protects against grenades and from getting inside dust, dirt, moisture and with an internal partition sewn to the front and back walls dividing the pocket into two cells.
The side walls of the valve taper towards the back wall, which makes it easy to open.
The valve is fastened on a turnstile brass button that can be unfastened in one direction (up).
For convenient fastening, the lower part of the button is mounted on the sewn П – shaped belt tape, under which you can stick your finger in the glove and fasten the button with one hand.
At the bottom there is a reinforcement with a belt tape 55 mm wide and a grommet with a diameter of 5 mm is installed to remove moisture. All loaded seams are triple, open sections are treated with an overlock. To open the valve with gloves, a “flag” 60 cm long is sewn to it from a belt tape 25 mm wide. For platforms, vests and belts with the PALS (MOLLE) system, the bag is fastened with two vertical and two horizontal belt belts. Vertical belts have rigid inserts and fasten to the bottom of the bag with metal buttons.
- Total height – 160 mm;
- Front wall height – 130 mm;
- The height of the internal partition is 110 mm;
- The width of the partition is 45 mm;
- Length (along the front wall) – 95 mm;
- Width – 50 mm.
- The weight of an empty pouch made of material with a density of 500D is 100 grams.
Shipping: shipping worldwide. (2-5 weeks)
Delivery: ships within 3 days after receiving cleared payment.