"Attack 4" Raid backpack with frame 60L by SSO (Sposn)
"Attack 4" raid backpack with a capacity of 60 liters is designed to carry a set of means for a soldier carrying a combat mission offline.
The set placed in the backpack may include: additional ammunition, equipment for the camp (tent, sleeping bag, insulation mat), warm clothing, a change of linen, personal care products, mining equipment, engineering equipment, food supplies, spare means of communication. The property is located in the main compartment with a removable partition, three external pockets, two pockets of the volumetric valve and on the external attachment points. The third pocket is removable and attached to the outer wall using the PALS (MOLLE) system. The soft three-liter water tank fits into a special pocket on the back of the main tank, the hose of which is discharged through an opening in the upper part of the back wall.
The main compartment is divided by a removable partition into two parts with two separate entrances. The upper entrance is closed with a tube and a valve with quick-release polymer locks. The lower entrance is closed with a zipper covered with a plate and quick-release polymer locks.
A sleeping bag is carried in the lower part of the main compartment. Inner flap pockets close with zippers. A belt belt with an adjusting buckle for attaching the covers of the backpack is attached inside the valve. Covers are used to mask (deforming or white staining) and protect the "Attack 4" raid backpack from moisture.
The tube and the neck of the main compartment are tightened with cords in the wings. For fastening the property on the external attachment points (loops), the kit includes four removable hinges from a belt with adjustment buckles in length. Hinges allow you to fasten a collapsed insulation mat (in a vertical or horizontal position), RPG, RSHG on a backpack.
To fasten mountain equipment, two special loops are attached in the bottom of the backpack. The hanging system of the backpack consists of an internal frame, two S-shaped shoulder straps and a waist belt with a lumbar cushion. Two dural tires ("armor") 5 mm thick serve as the inner frame. and a width of 30 mm. Tires are inserted into special pockets of belt strap from the inside of the rear wall.
For back protection and ventilation, two pillows with damping inserts and mesh lining are attached to the back wall. Shoulder straps are adjustable in height, using a belt loop of 50 mm wide, fastened to horizontal loops on the back wall of the main container (between soft pillows). The loop is fastened on a textile fastener "Linden". Fitted along the growth, the straps are additionally tightened with 25 mm strap belt tapes sewn to the bottom of the backpack and threaded through steel buckles with three slits sewn to the bottom of the shoulder straps. To fix the backpack and prevent it from swinging its upper part, straps are attached to the straps, with which the top of the main compartment is pulled towards the straps. Belts are threaded into steel buckles with three slits.
For quick dumping of a backpack to the right strap, a special, quick-release, steel lock is attached. For easy removal of a heavily loaded backpack, two arm loops are attached to the straps. The straps are pitted between each other with a chest lintel fastened with a quick-release polymeric lock.
To evenly distribute the load on the shoulders, soft pads are inserted into the straps – dampers. To prevent overheating, a synthetic mesh is attached to the lining of the straps and the belt. Waist belt 50 mm wide, fastened with a quick-release polymer lock. The excess belt is inserted into the plastic buckles with two slits.
To prevent the lower part of the backpack from swinging, belts are fitted to the belt, which are inserted into the steel buckles of the main compartment. For fastening of carbines above side pockets belt loops fasten. The "Attack 4" Raid backpack is made from 100% polyester fabric of plain weaving, with a density of 900 gr. / M². with polyurethane water-repellent coating. The lower part of the main compartment is made of 100% polyamide fabric of plain weaving, with a density of 1000 g / m². with reinforcing thread. All pockets and the main compartment of the backpack have drainage holes with grommets in the lower part.
Shipping: shipping worldwide. (2-5 weeks)
Delivery: ships within 3 days after receiving cleared payment.